NEW HPE7-A02 EXAM BOOK | HPE7-A02 VALID BRAINDUMPS PDF

New HPE7-A02 Exam Book | HPE7-A02 Valid Braindumps Pdf

New HPE7-A02 Exam Book | HPE7-A02 Valid Braindumps Pdf

Blog Article

Tags: New HPE7-A02 Exam Book, HPE7-A02 Valid Braindumps Pdf, Testing HPE7-A02 Center, Passing HPE7-A02 Score, HPE7-A02 Examcollection

If you buy HPE7-A02 study materials, you will get more than just a question bank. You will also get our meticulous after-sales service. The purpose of the HPE7-A02 study materials’ team is not to sell the materials, but to allow all customers who have purchased HPE7-A02 study materials to pass the exam smoothly. The trust and praise of the customers is what we most want. We will accompany you throughout the review process from the moment you buy HPE7-A02 Study Materials. We will provide you with 24 hours of free online services.

HPE7-A02 certification is highly valued in the IT industry as it demonstrates a candidate's expertise in network security. Aruba Certified Network Security Professional Exam certification is particularly relevant for IT professionals who work in enterprise environments where network security is critical. Aruba Certified Network Security Professional Exam certification opens up career opportunities in network security, including roles as network security engineers, security analysts, and security architects.

To be eligible for the HPE7-A02 Exam, candidates should have a strong understanding of network protocols and architectures, experience in wireless network design and management, and knowledge of network security technologies such as firewalls, intrusion detection and prevention systems, and virtual private networks. They should also have experience in analyzing and responding to network security threats and vulnerabilities.

>> New HPE7-A02 Exam Book <<

HPE7-A02 Valid Braindumps Pdf, Testing HPE7-A02 Center

The community has a lot of talent, people constantly improve their own knowledge to reach a higher level. But the country's demand for high-end IT staff is still expanding, internationally as well. So many people want to pass HP HPE7-A02 certification exam. But it is not easy to pass the exam. However, in fact, as long as you choose a good training materials to pass the exam is not impossible. We VCETorrent HP HPE7-A02 Exam Training materials in full possession of the ability to help you through the certification. VCETorrent website training materials are proved by many candidates, and has been far ahead in the international arena. If you want to through HP HPE7-A02 certification exam, add the VCETorrent HP HPE7-A02 exam training to Shopping Cart quickly!

HP HPE7-A02 exam is a vendor-neutral certification exam that is recognized globally. It is a comprehensive exam that tests an individual's knowledge of network security concepts and practices. HPE7-A02 exam is designed to assess a candidate's ability to design, implement, and manage secure enterprise networks, and to identify and mitigate potential security risks. Passing the HP HPE7-A02 Exam not only validates an individual's expertise in network security but also helps in career advancement by opening up new job opportunities and higher salaries.

HP Aruba Certified Network Security Professional Exam Sample Questions (Q106-Q111):

NEW QUESTION # 106
A port-access role for AOS-CX switches has this policy applied to it:
plaintext
Copy code
port-access policy mypolicy
10 class ip zoneC action drop
20 class ip zoneA action drop
100 class ip zoneB
The classes have this configuration:
plaintext
Copy code
class ip zoneC
10 match tcp 10.2.0.0/16 eq https
class ip zoneA
10 match ip any 10.1.0.0/16
class ip zoneB
10 match ip any 10.0.0.0/8
The company wants to permit clients in this role to access 10.2.12.0/24 with HTTPS. What should you do?

  • A. Add this rule to zoneC: 5 ignore tcp any 10.2.12.0/24 eq https
  • B. Add this rule to zoneC: 5 match any 10.2.12.0/24 eq https
  • C. Add this rule to zoneA: 5 ignore tcp any 10.2.12.0/24 eq https
  • D. Add this rule to zoneB: 5 match tcp any 10.2.12.0/24 eq https

Answer: B

Explanation:
Comprehensive Detailed Explanation
* The requirement is to permit HTTPS traffic from clients to the 10.2.12.0/24 subnet.
* ZoneC is configured to drop all HTTPS traffic to the 10.2.0.0/16 subnet. Therefore, the first match in the zoneC class (priority 10) will drop the desired traffic.
* To override this behavior, you must add a higher-priority rule (lower rule number) to zoneC that explicitly matches 10.2.12.0/24 and permits the traffic.
Thus, adding the rule 5 match any 10.2.12.0/24 eq https to zoneC ensures the desired traffic is permitted while maintaining the drop behavior for the rest of 10.2.0.0/16.
References
* AOS-CX Role-Based Access Control documentation.
* Understanding class priority and policy rule ordering in AOS-CX.


NEW QUESTION # 107
A company has a third-party security appliance deployed in its data center. The company wants to pass all traffic for certain clients through that device before forwarding that traffic toward its ultimate destination.
Which AOS-CX switch technology fulfills this use case?

  • A. Virtual Network Based Tunneling (VNBT)
  • B. Network Analytics Engine (NAE)
  • C. MC-LAG
  • D. Device profiles

Answer: A

Explanation:
Comprehensive Detailed Explanation
Virtual Network Based Tunneling (VNBT) is the appropriate technology for this use case because:
* Traffic Steering: VNBT enables traffic from specific clients or devices to be tunneled through a predefined network path. This allows traffic to pass through intermediate devices such as third-party security appliances.
* Policy Enforcement: VNBT can be configured to route traffic based on roles, VLANs, or other policy definitions, ensuring that only specified traffic flows are redirected to the security appliance.
* Scalability: This approach simplifies the redirection of traffic without requiring complex physical rewiring or changes to the underlying network topology.
Other Options:
* MC-LAG: Primarily used for high-availability and redundancy in multi-chassis link aggregation scenarios, not for traffic redirection through appliances.
* Network Analytics Engine (NAE): Used for monitoring and analytics, not traffic steering or forwarding.
* Device Profiles: Helps automate switch port configurations for specific device types but does not handle traffic redirection.
References
* AOS-CX Virtual Network Based Tunneling (VNBT) documentation.
* Aruba Switch Architecture and Traffic Flow Control Best Practices Guide.


NEW QUESTION # 108
Refer to the Exhibit:

These packets have been captured from VLAN 10. which supports clients that receive their IP addresses with DHCP.
What can you interpret from the packets that you see here?
These packets have been captured from VLAN 10, which supports clients that receive their IP addresses with DHCP. What can you interpret from the packets that you see here?

  • A. The mirroring session that captured the packets was likely misconfigured and captured duplicate traffic.
  • B. An admin has likely misconfigured two clients to use the same DHCP settings.
  • C. Someone is possibly implementing a MAC spoofing attack to gain unauthorized access.
  • D. Someone is possibly implementing an ARP poisoning and MITM attack.

Answer: C

Explanation:
The exhibit reveals duplicate IP addresses detected for 10.1.140.6, associated with two different MAC addresses:
* 88:56:56:ab:c6:89
* 88:13:30:a3:02:00
Key observations:
* Duplicate IP Address Detection:
* The message "Duplicate IP address detected for 10.1.140.6" clearly indicates two devices claiming the same IP address.
* This typically occurs when one device spoofs the MAC address of another device to intercept or disrupt traffic.
* MAC Spoofing Context:
* MAC spoofing is a tactic used to impersonate another device's hardware address to gain unauthorized access to a network.
* By spoofing a legitimate IP-MAC pairing, an attacker can bypass security mechanisms or cause denial-of-service conditions.
* Why the Other Options are Incorrect:
* Option B (Mirroring Misconfigured): While mirroring misconfiguration can duplicate traffic, it does not lead to a "duplicate IP detected" alert.
* Option C (Misconfigured DHCP): Misconfigurations usually result in DHCP conflicts, but they do not typically involve two different MAC addresses for the same IP.
* Option D (ARP Poisoning/MITM): ARP poisoning involves falsified ARP tables, but it does not directly trigger duplicate IP address detection. Instead, ARP packets flood the network.
Conclusion:
The evidence strongly suggests MAC spoofing, as two different MAC addresses are claiming the same IP address (10.1.140.6). This behavior is typical of attempts to gain unauthorized access or disrupt network operations.


NEW QUESTION # 109
You need to use "Tips:Posture" conditions within an 802.1X service's enforcement policy.
Which guideline should you follow?

  • A. Enable profiling in the service's general settings.
  • B. Create rules that assign postures in the service's role mapping policy.
  • C. Select the Posture Policy type for the service's enforcement policy.
  • D. Enable caching roles and posture attributes from previous sessions in the service's enforcement settings.

Answer: D

Explanation:
When using "Tips
" conditions within an 802.1X service's enforcement policy, you should enable caching roles and posture attributes from previous sessions in the service's enforcement settings. This ensures that ClearPass retains posture information from previous authentications, which is necessary for making decisions based on the current posture state of an endpoint. By caching these attributes, ClearPass can apply appropriate enforcement actions based on the device's posture status.


NEW QUESTION # 110
A company needs you to integrate HPE Aruba Networking ClearPass Policy Manager (CPPM) with HPE Aruba Networking ClearPass Device Insight (CPDI).
What is one task you should do to prepare?

  • A. Configure WMI, SSH, and SNMP external accounts for device scanning on CPPM.
  • B. Enable Insight in the CPPM server configuration settings.
  • C. Install the root CA for CPPM's HTTPS certificate as trusted in the CPDI application.
  • D. Collect a Data Collector token from HPE Aruba Networking Central.

Answer: B

Explanation:
To integrate HPE Aruba Networking ClearPass Policy Manager (CPPM) with HPE Aruba Networking ClearPass Device Insight (CPDI), one of the necessary tasks is to enable Insight in the CPPM server configuration settings. This configuration allows CPPM to communicate and share data with CPDI, facilitating the integration and enabling enhanced device profiling and policy enforcement capabilities.
1.Insight Enablement: Enabling Insight on the CPPM server allows it to leverage the data and capabilities of CPDI, integrating device profiling information into policy decisions.
2.Data Sharing: This integration ensures that CPPM can receive and use detailed device information from CPDI to make more informed policy enforcement decisions.
3.Configuration: Properly configuring the server settings to enable Insight ensures seamless communication and data flow between CPPM and CPDI.


NEW QUESTION # 111
......

HPE7-A02 Valid Braindumps Pdf: https://www.vcetorrent.com/HPE7-A02-valid-vce-torrent.html

Report this page